RUBBER LINING GLUED
Rubber lining glued
All these rubber coverings are glued. Most of the coverings are without seam with the exception of orange sponge and cellular/foeam rubber. These two products do not increase friction between belt and drum in exception to the other coverings. These coatings are applied to drive drums, rollers, pulleys etc.
General Characteristics
Types
F-Tril Black
All these rubber coverings are glued. Most of the coverings are without seam with the exception of orange sponge and cellular/foeam rubber. These two products do not increase friction between belt and drum in exception to the other coverings. These coatings are applied to drive drums, rollers, pulleys etc.
General Characteristics
- increases the friction between belt and drum
- reduces the chance of damage to and wear of belt and drum
- noise damping
- glued without seam
Types
F-Tril Black
- NR/SBR rubber
- Smaller chance of the belt stretching because of the lower belt tension
- for longer and heavier conveyor belts
- Increased the friction between belt and drum
F-Tril White
- NR/Nitril rubber
- Smaller chance of the belt stretching because of the lower belt tension
- for longer and heavier conveyor belts
- widely used in the food industry
Linatex
- natural rubber
- extremely hardwearing
- suitable for smaller diameters
- coverings powered rollers to create extra grip for the products to be transported
Linatril
- natural rubber
- extremely hardwearing
- resistant to oil, grease and dilute acids
- suitable for smaller diameters
- covering powered rollers to create extra grip for the products to be transported
Linafood
- natural rubber
- extremely hardwearing
- does not give off on the product
- suitable for smaller diameters
- widely used in the food industry, where there is a lot of grip needed
Orange sponge
- natural rubber
Mini checker black
- NR/SBR black natural rubber
- water drains off very well
- smaller chance of the belt stretching because of the lower belt tension
- is widely applied in bulk rubber conveyor belts, because Mini checker the dirt on the course side of the belt breaks loose, before it can be scraped off.
Mini checker Blue
- NR/Nitril Blue natural Rubber
- Resistant to oil, grease and dilute acids
- water drains off very well
- smaller chance of the belt stretching because of the lower belt tension
- is widely applied in the bulk rubber conveyor belts in the food industry, because Mini checker the dirt on the course side of the belt breaks loose, before it can be scrapped off
Cellular/Foam rubber
- EPDM black, cellular/foam rubber
- not oil and grease resistant
- not good water drainage
- widely used in rollers for extra protection and to protect the product to be transported
The stated information is guideline that will apply under normal circumstances. The information may be subject to change as a result of ongoing development. We would advise you to contact us for further details.
RUBBER HOT VULCANISED
Rubber coverings hot vulcanised
All these are hot vulcanised rubber coverings. This means that the rubber on the roller or drum is created without a seam. The layer thickness can be determined as desired. It is also possible to edit the trim making that the surface can be changed.
These coverings can be applied to drive drums, rollers, pulleys etc.
General Characteristics
All these are hot vulcanised rubber coverings. This means that the rubber on the roller or drum is created without a seam. The layer thickness can be determined as desired. It is also possible to edit the trim making that the surface can be changed.
These coverings can be applied to drive drums, rollers, pulleys etc.
General Characteristics
- increases friction between belt and drum
- reduces the chance of damage and wear of the belt and drum
- without seam
- noise damping
- optimal adhesion
- on request FDA/USDA approved
Etheen-Propeen (EPDM)
- natural rubber
Styreen-Butadieeb (SBR)
- synthetic rubber
Neopreen (cR)
- synthetic rubber
Natural Rubber (NR)
- natural rubber
Nitric (NBR)
- natural rubber
Viton (FKM)
- synthetic rubber
- highly resistant to high temperatures
Siliconen (VMQ)
- Synthetic rubber
- highly resistant to high temperatures
The stated information is guideline that will apply under normal circumstances. The information may be subject to change as a result of ongoing development. We would advise you to contact us for further details.
AIDPRENE & VULKOLAN (PU) COATING HOT VULCANISED
Adiprene & Volkolan (PU)coating hot vulcanised
These coatings are hot vulcanised, this means that the PU on the roller or drum has been poured. The layer thickness can be determined as desired. It is also possible to edit the surface of the covering.
These coverings can be applied to drive drums, rollers, pulleys etc.
General characteristics
Adiprene (PU)
These coatings are hot vulcanised, this means that the PU on the roller or drum has been poured. The layer thickness can be determined as desired. It is also possible to edit the surface of the covering.
These coverings can be applied to drive drums, rollers, pulleys etc.
General characteristics
- very high pressure resistance
- highly resistant to abrasion
- without seam
- sound reducing
Adiprene (PU)
- polyurethane
Vulcan (PU)
- polyurethane
The stated information is guideline that will apply under normal circumstances. The information may be subject to change as a result of ongoing development. We would advise you to contact us for further details.