Standards and Tolerances.
Our machinery, and the machinery of our suppliers, limits us to maximum and minimum sizes leading to tolerances in AL,RL,LOB,SWL,LOM and LOT sizes.
Tolerances
Cut Spindles and tubing : = +0.0 mm / -0.5 mm
Plastic labyrinth seal and bearing cartridges : = +/-0.05 mm
Deep drawn and/or turned steel bearing : = +0.0 mm / -0.2 mm
Precision Bearings : = negligible
Pressed and turned conical bearings ; = +0.0 mm / -0.3 mm
Tolerances
Cut Spindles and tubing : = +0.0 mm / -0.5 mm
Plastic labyrinth seal and bearing cartridges : = +/-0.05 mm
Deep drawn and/or turned steel bearing : = +0.0 mm / -0.2 mm
Precision Bearings : = negligible
Pressed and turned conical bearings ; = +0.0 mm / -0.3 mm
AL = Spindle Length
|
LOM = Length over the nuts
LOB = Length over the bushings BL = Tube Length |